LDM partially filled waste water flow measurement

Ultrasonic transit time difference flow measurement for wastewater, raw wastewater and rainwater

LDM partially filled Flow measurement

Highly precise flow value acquisition. The LDM is a calibrated measuring device for backflow-free flow measurement of waste water in open channels or free flowing lines. 10 flow velocity measuring sections distributed over the entire cross section provide most accurate flow values when the sensor is partially or fully filled. The level measurement is integrated in the device housing.

Portable flow measurement for wastewater and external water

Temporary use of the proven MID for full filling to collect high-precision measurement data.

Portable flow measurement with MID

Waste water and external water flow measurement Measurements are performed with a high-precision, portable MID flowmeter mechanically protected by a plastic layer, which is normally installed in existing shafts and ducts without structural modifications. A bypass cushion completely seals the channel cross section and guides the entire water quantity completely through the measuring system.

Special solutions for measuring wastewater, raw wastewater and rainwater under the most difficult conditions.

Stationary flow measurement for wastewater

When the impossible becomes possible. High flow velocities, steep gradients, tight spaces, large measuring range. The more difficult the measuring task, the more suitable is the stationary flow measurement, which can often be retrofitted in existing structures and shafts.

TF stationäre Durchflussmessung teilgefüllt für Abwasser und Regenwasser

Ultrasonic transit time difference measurement with dry weather gutter

TF Stationary flow measurement partially filled

The TF Stationary Flow Measurement is a calibrated measuring channel for backflow-free flow measurement of wastewater, raw wastewater and rainwater in open channels or open channels.

Installation in waste water structures, underground facilities, explosive environments

Proud of our craft!

Assemblies

Day after day, STEBATEC fitters honour our craft by carrying out installations of the highest quality that are a joy to the eye of the professional.

Non-intrusive ultrasonic flow measurement for closed and fully filled pipelines.

Clamp-on flow measurement

Flow measurement on the outer wall of the pipe. With a flowmeter with clamp-on transducers it is possible to measure the flow in pipes simply from the outside. The transducers are installed on the pipeline with little technical effort and without process interruption. Rotationally symmetric flow profiles can be measured with only one acoustic section; non-symmetric ones require the use of several sections.

Application: Waste water charges for industrial companies

LDM partially filled Flow measurement

Portable flow measurement with MID

Stationary flow measurement for wastewater

TF Stationary flow measurement partially filled

Assemblies

Clamp-on flow measurement

Follow us …

Offers, solutions and services

Topics

Search

Industries

Field of application