Pneumatic discharge control partially filled TF-PNA

• The control flap is located immediately after the flow measurement. This allows it to react quickly to changes in flow rate and can also maintain the programmed control value with the smallest deviation and delay time.
• For the comparison with a knife gate valve flow control, the rule of thumb 1 to 10 can be used: Whereas a knife gate valve can move to 100 individual positions in stages, the pneumatic flow control system, thanks to its infinitely variable pressure control, can achieve at least 1000 individual positions – resulting in a massively higher control accuracy.

The control system of the pneumatic discharge control contains a touch display with zoom and wipe function as well as a data logger and a local small DCS for use with a web browser, which can be accessed in the local network or, if desired, via Internet. In addition to the versatile interfaces, the small DCS or the web server can also be integrated and displayed in the customer’s process control system.

Included as standard with modem for using all mobile networks up to 4G/LTE, Fixnet Internet connection and VPN technology

• Signal outputs: 4-20 mA: instantaneous flow rate and set control value
• Digital (active/passive): Flow counter and 2x fault
• Signal inputs: 4-20 mA: set-point control value
• Digital (potential-free): OPEN (remote); CLOSED (remote); AUTOMATIC; MANUAL START CLEANING;
• Communication: RS485 (Modbus RTU/ASCII), RS232, Ethernet (Modbus TCP) Connection via Internet/VPN.
• VPN connection for remote maintenance with STEBATEC(Internet connection with STEBAmobile possible)

Connection diagram on request.